We finally moved the wing to the tent. It really works well. There's room for a table and room to walk around the wing even with it in the flat position. I've secured the cover a little better since this picture. I put eye bolts at each pole and the tarp and cover are tied down to them. It pulls it all tight and the timbers weigh enough to hold it in the wind. It needs a fan in the peak on sunny days.
.
The first task was to put 4 coats of Poly Brush on the reinforcing tapes to seal them so they don't suck all the Poly Brush out of the Finishing Tapes. I didn't believe it would take four coats but it does.
Next the Doilies were glues over the Inspection Rings.
Now we're ready for Patches and Tapes.
We finally moved the wing to the tent. It really works well. There's room for a table and room to walk around the wing even with it in the flat position. I've secured the cover a little better since this picture. I put eye bolts at each pole and the tarp and cover are tied down to them. It pulls it all tight and the timbers weigh enough to hold it in the wind. It needs a fan in the peak on sunny days.
.
The first task was to put 4 coats of Poly Brush on the reinforcing tapes to seal them so they don't suck all the Poly Brush out of the Finishing Tapes. I didn't believe it would take four coats but it does.
Next the Doilies were glues over the Inspection Rings.
Now we're ready for Patches and Tapes.
No comments:
Post a Comment